Maintenance Tips
Maintenance
Complete E-Bike Maintenance Guide: Keep Your Electric Bike Like New
Why E-Bike Maintenance Matters
Electric bikes are sophisticated machines that require proper care to ensure optimal performance, safety, and longevity. Regular maintenance not only extends your e-bike's lifespan but also keeps you safe on the road.
Battery Care
Charging Best Practices
Always use the original charger provided by the manufacturer
Avoid overcharging - unplug when fully charged
Charge when battery reaches 50-70% capacity
Avoid charging in extreme temperatures (below 32°F or above 104°F)
If storing long-term, charge at least once per month
Battery Storage
Store in a cool, dry place away from direct sunlight
Maintain 50% charge level for long-term storage
Remove battery if storing bike for extended periods
Check battery connections regularly for corrosion
Mechanical Components
Chain Maintenance
Clean chain every 100-200 miles or after wet rides
Use a dedicated chain cleaner and degreaser
Apply chain lubricant after cleaning
Check chain tension and adjust as needed
Replace chain when stretched beyond manufacturer specs
Brake System
Inspect brake pads for wear regularly
Adjust brake cable tension as needed
Keep brake rotors clean and free from oil
Test brake function before each ride
Replace brake pads when worn to minimum thickness
Tire Care
Check tire pressure weekly (refer to sidewall for PSI)
Inspect for cuts, punctures, or excessive wear
Remove debris stuck in tread
Replace tires when tread depth is insufficient
Rotate tires if wear pattern is uneven
Electrical System
Controller and Display
Keep electrical components dry and clean
Check all connections for looseness or corrosion
Clean display screen with soft, dry cloth
Address error codes immediately
Protect from water during cleaning
Motor Maintenance
Keep motor housing clean and dry
Avoid riding through deep water
Check motor mounting bolts for tightness
Listen for unusual noises during operation
Have motor serviced if overheating occurs
Daily Riding Tips
Good Riding Habits
Start pedaling before engaging motor assistance
Use appropriate assist levels for terrain
Avoid sudden acceleration and hard braking
Don't exceed maximum weight capacity
Clean bike after riding in wet conditions
Storage Recommendations
Store in a covered, secure location
Use a bike cover for outdoor storage
Avoid leaving in direct sunlight for extended periods
Rotate bike position occasionally to prevent tire flat spots
Troubleshooting Common Issues
Reduced Range
Check battery health and age
Verify proper tire pressure
Assess riding conditions and habits
Consider battery replacement if significantly degraded
Unusual Noises
Check chain lubrication and alignment
Inspect brake pad position
Examine wheel bearings
Listen to motor operation
Electrical Problems
Check all connections
Verify battery charge and condition
Reset system if applicable
Consult manual for error codes
Professional Service: For complex issues or if you're uncomfortable performing maintenance, visit a qualified e-bike technician. At Kingbull Bikes, we offer comprehensive e-bike maintenance and repair services to keep your ride in perfect condition!
Read more
Maintenance
How to Make Your E-Bike Disc Brakes Last Longer
With the growing popularity of electric bikes, more riders are realizing the importance of braking safety. Whether you're commuting daily or cruising on the weekend, your e-bike's disc brakes play a critical role in your ride experience. But how much do you actually know about them?
Let’s dive into the basics of disc brakes, common issues you may face, and some practical tips to make your e-bike braking system last longer and perform better.
What Are Disc Brakes?
Disc brakes work by using brake pads to squeeze a rotor (disc) attached to your wheel. This friction slows the wheel down. There are two main types used in e-bikes:
1. Hydraulic Disc Brakes
Use brake fluid to transfer force.
Offer strong stopping power with minimal effort.
Great for performance and steep terrains.
Downside: More complex and requires regular maintenance to prevent leaks and keep the seals in good condition.
2. Mechanical (Cable-Pull) Disc Brakes
Use a brake cable to apply pressure on the disc.
Easier to maintain and more budget-friendly.
Suitable for city commuters and casual riders.
Downside: Can lose braking power over time due to cable stretch or friction in the cable housing.
🔍 Common Disc Brake Problems on E-Bikes
Even with regular use, disc brakes can develop issues. Here are three of the most common problems and how to fix them:
1. Brakes Feel Too Tight or Too Loose
If your brakes feel sticky or don't engage at all, the brake cable tension is likely off.
Fix: Adjust the tension knob near the brake lever.
Turn counterclockwise to tighten.
Turn clockwise to loosen.
2. Squeaky or Rubbing Brakes
This usually happens when:
The brake rotor is misaligned.
The rotor is warped due to impact or heat.
Fix: Adjust the rotor position with the mounting screws. If the disc is warped, replace it to prevent damage to other parts.
3. Weak or No Braking After a While
This is often caused by worn brake pads or stretched brake cables.
Fix: Check the pads and cables for wear and replace them as needed. Brake pads usually last between 6 months to 1 year depending on usage.
How to Maintain Your E-Bike Disc Brakes
Here’s how to keep your disc brakes in top shape and extend their lifespan:
✅ 1. Ride Smoothly – Avoid Sudden Braking
Avoid aggressive braking unless absolutely necessary. Hard braking can:
Lock the wheels and cause you to lose balance.
Wear out brake pads faster.
Overheat or warp the rotor.
Train yourself to brake gradually and anticipate stops ahead of time.
✅ 2. Regularly Inspect Brake Pads & Cables
Check your brake pads at least every 3–6 months.
Replace them when they become thin or glazed.
Inspect cables for rust, fraying, or reduced tension.
✅ 3. Protect the Brake Rotors
Keep the rotors clean and free from dirt or oil.
Avoid impacts that can bend or warp the disc.
If using mechanical brakes, keep cables well-lubricated to reduce friction and maintain responsiveness.
Final Thoughts
Disc brakes are a key safety feature for any electric bike. Whether you’re riding through city traffic or down a country trail, proper brake maintenance ensures both safety and performance. Follow these tips to keep your system reliable—and make your e-bike experience smoother and safer every time you ride.
Read more
Maintenance
Lost or Broken Battery Lock Key? Here's What to Do
With the continuous development of society and advancements in technology, the emergence of electric bicycles has brought us a fresh cycling experience. However, before embarking on a ride with an electric bicycle, it is crucial to understand how to operate it safely. This article will provide a riding guide for beginners to help you begin your journey of electric bicycle riding.
What is an electric bicycle
An electric bicycle, commonly known as an e-bike, is a type of bicycle that is equipped with an integrated electric motor and a rechargeable battery. This electric motor is designed to assist the rider's pedaling efforts, providing additional power to make cycling easier, especially when facing inclines or when the rider desires to travel at a faster speed. E-bikes come in various styles, including traditional-looking bicycles with a discreet electric motor and more futuristic designs.
Familiar with the functions and performance of electric bicycles
E-bikes offer a range of features and performance capabilities, providing riders with enhanced convenience and enjoyment. Here is a detailed description of the functions and performance of electric bicycles:
Electric Assist System
Function: A core feature of electric bicycles is the electric assist system, comprising an electric motor and a battery. Riders can activate, deactivate, or adjust the intensity of the electric assist via a control panel or handlebar. This system provides additional power, aiding pedaling efforts and reducing the physical exertion of riders.Performance: The performance of the electric assist system depends on factors like battery capacity, the power of the electric drive system, and the chosen assist level. Some e-bikes offer multiple assist levels, allowing riders to tailor assistance to various riding conditions. High-performance systems can deliver substantial assistance, especially in scenarios such as climbing hills or facing headwinds.
Speed and Assistance
Function: Electric bicycles can effortlessly attain higher speeds, particularly when the electric assist is engaged. Riders can find a balance between electric assistance and pedaling to achieve desired speeds.Performance: The speed of electric bicycles is generally governed by the power output of the electric assist system. Different e-bike models may have varying maximum speeds, but most can reach speeds between 20 to 45 kilometers per hour.
Range and Battery Life
Function: Range refers to the distance an e-bike can travel on a single charge, contingent upon battery capacity and model specifications.Performance: The range is influenced by riding conditions (terrain, wind resistance), chosen electric assist level, rider's weight, and other factors. Higher-capacity batteries and energy-efficient riding can extend the range significantly.
Versatile Uses
Function: Electric bicycles are suitable for various riding scenarios, including urban commuting, leisure cycling, long-distance journeys, and cargo transportation. Electric assist makes riding more comfortable, catering to riders of varying ages and fitness levels.Performance: Different e-bike types (urban, mountain, folding, etc.) possess specific performance characteristics to meet diverse riding needs.
Energy Efficiency and Environmental Benefits
Function: E-bikes are renowned for their relative energy efficiency and environmental friendliness. They utilize batteries as the primary power source, emitting no exhaust gases, which contributes to improved air quality.Performance: Energy efficiency of e-bikes also depends on how the electric assist is utilized. Riders can opt for higher assist levels to reduce pedaling effort, resulting in greater energy savings.
Safety Features
Function: Some electric bicycles come equipped with safety features such as front and rear lights, brake lights, audible alerts, and brake sensors to enhance rider safety. Performance: These safety features aid rider visibility in low-light conditions, alert other road users, and reduce the risk of potential accidents. This demonstrates that electric bicycles offer outstanding functionality and performance, providing riders with a convenient, comfortable, and environmentally friendly cycling experience. Different models of electric bicycles come with various features to meet diverse riding needs. These electric assist systems offer riders more choices, enhancing convenience and versatility, whether for urban commuting or leisurely rides.
Things To Do Before Riding
Before your first ride on an e-bike, there are several essential preparations to ensure a safe and smooth riding experience. Here are key steps:
1. Display
Check the Display Screen: First, confirm that the e-bike's display screen is functioning correctly. The screen typically shows information such as battery level, assist level, speed, and mileage. Ensure the display is readable to access necessary information while riding.
2. Battery
Charge the Battery: Make sure the battery is charged, with sufficient capacity to support your riding plans. A fully charged battery allows for an extended range. Insert the Battery: Insert the battery correctly into the e-bike's battery compartment, ensuring it is securely locked in place.
3.Bike Inspection
Brake System：
Check the brake system to ensure that the brake levers operate responsively and that the brakes work properly. If necessary, adjust the brakes and ensure there is enough pad wear left.
Tire Pressure: Inspect tire pressure, ensuring they are inflated to the recommended range. Low tire pressure can affect riding stability and efficiency. Gears and Chain: Inspect the condition of gears and the chain, making sure they are clean, lubricated, and free from obvious damage. Proper lubrication can extend the lifespan of gears and the chain and improve riding performance.
4. Helmet and Safety Gear
Wear a Helmet: Never forget to wear a helmet. A helmet is a crucial safety gear item when riding, providing protection for the head from potential harm. Ensure the helmet is securely fastened and not loose.Additional Safety Gear: Depending on your needs, consider wearing gloves, protective eyewear, and a reflective vest, among other safety gear. These items can enhance safety and comfort during the ride.
5. Familiarize Yourself with Basic E-Bike Operations
Get to Know the Controls: Before hitting the road, familiarize yourself with the controls of the e-bike. Understand how to start and stop electric assistance and how to adjust assist levels.
Test the Brakes: Test the brakes before riding to ensure they are functioning properly. Familiarize yourself with the brake lever's pressure and braking effect.After completing these preparations, you will be ready to enjoy your first ride on an electric bicycle. Remember that safety is paramount, so ensure both the bicycle and safety gear are in good condition. May you find enjoyment in riding while maintaining safety!
Attention should be paid to the process of riding
Riding an e-bike is an enjoyable activity, but special attention needs to be paid to the following during the ride to ensure a safe and comfortable experience:
1. Follow Traffic Rules and Laws
When riding an electric bicycle, it's essential to adhere to local traffic rules and laws, including speed limits, traffic signals, and parking regulations.
2. Stay Alert
Always remain vigilant and be aware of your surroundings, including other traffic and road conditions. Electric bicycles can reach higher speeds, so extra caution is necessary.Use rearview mirrors to check for traffic behind you, especially when changing lanes, overtaking, or making turns. Ensure there are no vehicles or pedestrians in your blind spots.
3. Adapt to Electric Assistance
Get accustomed to operating the electric assist system. Start with lower assist levels and gradually increase them to become familiar with the acceleration and speed of the electric bicycle.Avoid using high assist levels on steep uphill slopes to prevent losing control.
4. Brake Usage
Use the brakes cautiously, especially during high-speed riding or downhill descents. Avoid abrupt braking, as electric bicycles may have longer braking distances.Understand the braking performance and make brake adjustments as needed to ensure comfortable brake lever operation.
5. Wear Appropriate Gear
Helmet: Always wear a helmet, regardless of your riding destination. A helmet is one of the most crucial safety gear items, providing protection for your head.Proper Footwear: Wear appropriate footwear to ensure your feet can securely grip the pedals. Open-toed shoes and sandals are generally not suitable for cycling.
6. Traffic Safety
Exercise extra caution at intersections and while making turns. Use hand signals to indicate your intentions, ensuring other vehicles understand your direction.Avoid competing for road space with other vehicles and try to stay within designated bicycle lanes.
7. Focus on battery
Monitor the battery level to ensure you have enough power to return to your destination. If the battery level is low, the electric bicycle may not provide sufficient assistance, potentially leaving you stranded.
8. Road Conditions and Weather
Exercise caution when riding on different road conditions such as wet or slippery surfaces, muddy trails, or uneven terrain.Be especially alert when riding in rainy or adverse weather conditions, as visibility may be reduced, and road surfaces may become more slippery.
9. Maintenance and Care
Regularly inspect critical components of the bicycle, including brakes, tires, gears, and the chain, to ensure they are in good working condition.Keep the electric bicycle clean, removing dust and dirt to maintain optimal performance.
10. Plan Your Route
When riding on unfamiliar routes, plan your trip in advance and be aware of the locations of charging stations to ensure you won't run out of power.Following these guidelines will help you enjoy a safe, pleasant, and comfortable riding experience on your electric bicycle. Safety is always a top priority, so remain vigilant about your surroundings to ensure your safety and the safety of others.
Things to watch out for after the ride
After completing your ride on an electric bicycle, there are several important steps and things to consider to ensure your e-bike is in good condition and ready for the next ride. Here are the things to keep in mind after finishing your ride:
1. Turn Off Electric Assistance
After your ride, immediately turn off the electric assist system to conserve battery power. This helps prolong the battery's lifespan, especially if you don't plan to recharge it right away.
2.Charge the Battery
If you have access to charging equipment, connect the battery to the charger and recharge it. Make sure the battery is fully charged before your next ride. Generally, keeping the battery in a medium state of charge contributes to its longevity.
3. Inspect the Bicycle
Thoroughly inspect the overall condition of the electric bicycle, including the brakes, tires, gears, and chain, among other crucial components. Ensure there are no signs of damage or components in need of repair.If you notice any issues, address them promptly by repairing or replacing damaged parts to ensure the bicycle's safe operation during your next ride.
4. Clean and Maintain
Clean the bicycle as needed, removing dust, dirt, and residue from lubricants to maintain both its appearance and performance. This is especially important after riding in muddy or rainy conditions.Regularly lubricate the chain and gears to extend their lifespan and improve riding efficiency.
5. Store the Electric Bicycle
Store the electric bicycle in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Avoid exposing the bike to adverse weather conditions.If possible, use a bicycle lock to secure the bike and prevent theft.
6. Record Mileage and Maintenance
Keep a record of your riding mileage to track when routine maintenance is due. Typically, bicycle manufacturers provide recommended maintenance schedules based on mileage.Periodically check the wear of the brake pads and replace them as needed. Worn brake pads can compromise braking performance.
7. Safely Store Chargers and Accessories
Store the charger and other accessories in a safe location to prevent damage or loss. Ensure they are easily accessible for recharging the battery when needed.These steps and considerations will help you maintain your electric bicycle in good condition, prolong its lifespan, and prepare it for your next ride. Regular maintenance and careful attention to your e-bike will ensure it continues to perform at its best while keeping your riding experience safe and comfortable.
Tips for riding an electric bike
Riding an electric bicycle has become a fashionable and convenient mode of transportation in modern urban life. It not only reduces commuting time but also minimizes environmental pollution. However, to ride an electric bicycle safely and efficiently, some skills and knowledge are required.
1.Familiarize Yourself with Your Electric Bicycle
Before you start riding, it is essential to understand your electric bicycle. Knowing the battery life, charging time, maximum speed, and various riding modes is crucial for safe riding. Read the user manual of your electric bicycle and make sure you have a good grasp of all the important information.
2.Control Your Speed
Electric bicycles typically have adjustable speeds, but it's important not to chase after extreme speeds. Adapt to different riding conditions, slow down to accommodate traffic and road conditions, and gradually increase your speed to better control the electric bicycle.
3.Learn to Maintain Balance
The center of gravity of an electric bicycle may differ from that of a traditional bicycle, so it takes some time to adapt. Practice your balance, especially when turning and maneuvering through narrow passages; this is essential for safe riding.
4.Maintain the Proper Posture
The correct riding posture can reduce strain on your body and enhance riding comfort. Keep your upper body upright, grip the handlebars, and maintain relaxed elbow positioning to reduce fatigue in your arms and shoulders.Riding an electric bicycle is a pleasurable way to get around, but safety should always be the top priority. By understanding your bicycle, following traffic rules, maintaining good posture, and continually improving your skills, you can enjoy this convenient mode of transportation and ensure a safe journey on the road. Whether you are a city commuter or a leisure cyclist, these tips will help you ride your electric bicycle more effectively.
Summary
Electric bicycles provide riders with a new and convenient way of commuting. However, safety always remains the top priority. Whether you are a beginner or an experienced cyclist, this article offers essential information and guidance about electric bikes. We hope that this article provides valuable insights for your future cycling journeys. Adhering to traffic rules, staying vigilant, regularly maintaining your bicycle, and continually improving your riding skills are key to ensuring safe cycling. Riding an electric bicycle can be an enjoyable and eco-friendly mode of transportation, as long as we balance convenience with a strong sense of responsibility and safety awareness.
Read more
Maintenance
How to Install a Front Basket on Your Bike – A Step-by-Step Guide
Adding a front basket to your bike is a great way to increase its practicality, whether you’re commuting, running errands, or just enjoying a leisurely ride. A well-installed basket provides convenient storage without compromising the bike’s stability. In this guide, we’ll walk you through the step-by-step process of installing a front basket, including repositioning the front light for a seamless fit.
Step 1: Remove the Front Light
Remove the original front light to make room for the front basket installation.
Step 2: Attach the Front Basket
Align the holes of the front basket with the reserved mounting holes on the bike frame, then secure it using washers and screws.
Step 3: Install the Bracket
Install the new bracket in the designated slot at the front of the basket. Pay attention to the bracket's installation direction.
Step 4: Reinstall the Front Light
Remove the original front light bracket and install the front light onto the new bracket. After installation, reconnect the wiring to complete the setup.
Final Thoughts
With your front basket properly installed, your bike is now more functional and stylish! Whether you're carrying groceries, a backpack, or other essentials, this upgrade will make your rides more convenient. Happy cycling!
Read more
Maintenance
Kingbull Electric Bike Tire Assembly Guide: Ride Safer and More Comfortably!
Hey Kingbull Electric Bike Riders! We're so stoked you're part of the Kingbull family! Your wheels are your connection to the road, so keeping them in top shape is key for a safe and awesome ride. That's why we've put together this guide to walk you through tire assembly and maintenance. Let's keep those wheels turning!
Why Choose Kingbull Electric Bikes?
Kingbull is committed to providing users with high-quality, high-performance electric bikes. Our e-bikes are not only stylish and performant, but also meticulously crafted in every detail. For example, our wheels:
Use Schrader Valves: Schrader valves are sturdy, durable, and provide a good seal, making inflation easier and preventing air leakage.
Offer a Variety of Specifications: We offer a wide range of sizes and specifications including 20-inch and 26-inch CST fat tires to meet different models and riding needs, ensuring you can find the best tire for you.
Recommended Tire Pressure: Based on the characteristics of Kingbull electric bikes, we recommend a tire pressure range of 25-30 psi. This ensures both riding comfort and tire wear resistance.
Preparation
Before starting the assembly, make sure you have the following tools and materials ready:
New tires (make sure they match your Kingbull electric bike model)
Wheel rims
Hand pump or air compressor
Wrench (choose the size according to your e-bike's wheel hub nuts)
Jack (if you need to lift the e-bike)
Tire levers (may be needed to remove old tires)
Gloves (optional, to keep your hands clean)
Assembly Steps
1. Removing Old Tire (if replacing)
If you are replacing tire, you first need to remove the wheel.
Use a wrench to loosen the wheel hub nuts.
If you need to lift the e-bike, you can use a jack.
Carefully remove the old tire from the wheel.
2. Inspecting the Rims
Check the Wheel for damage or deformation.
Clean the Wheel to ensure there is no debris.
3. Installing New Tire
Insert the valve stem of the new tire into the valve hole of the Wheel. Most Kingbull electric bikes use Schrader valves, so please pay attention to the distinction.
Attach the tire bead to the wheel hub.
Make sure the tire is fully seated on the Wheel.
4. Inflating
Use a hand pump or air compressor to inflate the tire to the appropriate pressure. For Kingbull electric bikes, we recommend inflating the tires to 25-30 psi. You can press the tire with your hand to feel the inflation, the tire should not be easily deformed by pressing.
Be careful not to overinflate, as this may cause the tire to burst.
The tire pressure value can usually be found on the tire sidewall.
5. Installing the Wheel
Install the wheel on the e-bike.
Use a wrench to tighten the wheel hub nuts.
Make sure the wheel is securely installed.
Tire Maintenance and Care for Your Kingbull E-Bike
Proper assembly is key, but regular maintenance and care are also essential to maximize the lifespan of your tires and ensure your safety while riding. Here are some helpful tips:
1.Regular Tire Pressure Checks
Maintaining the correct tire pressure is crucial for optimal tire performance and safety. We recommend checking your tire pressure regularly and adjusting it as needed within the recommended range for Kingbull e-bikes (25-30 psi).
2.Inspect for Wear and Tear
Periodically examine your tires for any signs of cracking, cuts, or uneven wear. If you notice significant wear, it's time for a tire replacement.
3.Avoid Impacts and Squeezes
While riding, try your best to avoid hitting or squeezing your tires against hard objects, as this can cause damage.
4.Keep Your Tires Clean
Regularly clean your tires to remove dirt, debris, and other foreign objects from the tire surface. This helps maintain tire cleanliness and prolong their lifespan.
Troubleshooting wheel Wobbles
Even with regular maintenance, you might sometimes experience a wobbly wheel. wheel wobbles are a common issue with e-bikes, and here are some of the usual suspects:
Low Tire Pressure: Underinflated tires can cause them to deform, leading to a wobble. The fix is simple – pump up your tires to the correct pressure using a bike pump or air compressor.
Improper Assembly (Inner Tube and Rim Mismatch): If the inner tube and tire aren't seated correctly on the rim, it can throw off the balance and cause a wobble. You'll need to take the tire off and reinstall everything, making sure it's all lined up properly.
Loose Hub Axle: A loose hub axle can cause the whole wheel to wobble. Grab your wrench and tighten that axle!
Uneven Tire Wear: If your tire is worn down unevenly, it can cause the center of gravity to shift, resulting in a wobble. Time for a new tire!
Damaged Rim: A bent or damaged rim is a common cause of tire wobbles. If this is the case, you'll need to replace the rim.
If your Kingbull e-bike has a wobbly wheel, it's super important to figure out why and get it fixed before you hit the road. Your safety is what matters most!
Kingbull Support
If you have any questions about installing your tires or run into any issues, don't hesitate to reach out to Kingbull customer support. We're here to help!
Video Tutorial
Want to see it in action? Check out our video tutorial for a step-by-step walkthrough:
We hope this guide helps you keep your Kingbull e-bike rolling smoothly and safely. Happy riding!
Read more
Maintenance
How to Replace the Throttle
Replacing the throttle might sound like a complicated task, but with the right steps, it’s a manageable DIY project that can save you time and money. Whether your throttle is unresponsive, sticking, or completely malfunctioning, replacing it can restore your vehicle’s performance and ensure a smoother driving experience. In this guide, we’ll walk you through the process step by step so you can get back on the road with confidence.
Specific Steps
Step 1:Loosen the Handlebar Grip
Use the provided tool to turn the handlebar grip screw counterclockwise until it loosens.
Step 2: Remove the Old Throttle and Install the New One
Once the grip is loose, carefully disconnect the throttle cable and remove the grip. Next, install the new throttle, reconnect the cable securely, and tighten the screw by turning it clockwise.
Conclusion
Replacing your throttle isn’t as difficult as it may seem. By following the correct steps, you can successfully complete the job and improve your vehicle’s performance. Always double-check your work, ensure all components are securely in place, and test the throttle before driving. If you’re unsure about any step or run into issues, don’t hesitate to consult a professional mechanic. We hope this guide helps—happy driving!
Read more